The Best Replacement Door Knobs For Old Doors

Product Description

If your door knob set is acting up or broken, this E 2537 Mortise style fluted glass door knob set is the perfect choice for updating and fixing hardware on interior doors. With a beautiful and classic fluted glass and bronze finish, it’s the perfect choice for your antique or vintage interior doors. Installation is a breeze, and the glass door knob set features 2” outside diameter knobs. These door knobs are for interior use only, and includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style door knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The diecast base on these knobs include the set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For matching rosettes see Prime-Line’s model number E-2543. Prime-Line Products does not currently manufacture a matching latch bolt, but you might consider using model number E-2497 which is a complete vintage mortise lock set in a classic bronze finish. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are made from glass and measure 2 in. in diameter. They have a die cast constructed base as used on interior and exterior locksets and a 1/4 in. square spindle. They come plated in classic bronze and fit most old style passage doors.

Highlights: Finish: Oil Rubbed Bronze Material: Steel Security Grade: Grade 1 Backset Length: 2-3/8″ Maximum Door Thickness: 1-3/4″ Minimum Door Thickness: 1-3/8″ Indoor or Outdoor: Indoor and Outdoor Faceplate Material: Steel Door Direction: Left or Right Handed Trim Rings: Yes Commercial or Residential: Commercial and Residential Packaging Type: Carded

Product Description

These knobs are constructed from solid brass and plated in classic bronzed. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

From the Manufacturer

These knobs are constructed from solid brass and plated in classic bronzed. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

Product Description

These vintage style door knobs are constructed of steel and come in a satin nickel finish. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The shanks on these knobs include set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For SOLID BRASS knobs, kindly see Prime-Line’s model number E 2297. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are constructed from solid brass and plated in satin nickel. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

Whether you’re replacing the lock set on your antique doors or just love the traditional look of a glass knob, this E 2497 Mortise Lock set is the perfect choice for fixing hardware on interior doors. Made with a bronze plated steel constructed trim and a glass knob, it has a beautiful traditional look with modern construction! It can be used for left or right hand installations, and has a lock bolt that is key activated from both the inside and outside. When you’re restoring antique doors or replacing or updating hardware on older interior doors in your home, this E 2497 Mortise Keyed Lock Set with Glass Knob is the perfect choice! Fits Doors with 2-3/8″ backset.

Product Description

When it’s time to replace damaged or missing vintage-style surface-mounted door locks, look no further than Prime-Line E 2437 Polished Brass Vertical Trim Lock Set. The black painted cast steel construction and brass plated steel components closely match the old lock sets of period homes and are perfect for antique doors. The antique skeleton key locking system and vintage look of the knobs and rosettes will match other antique hardware throughout the home. The vertical mount lock set has a 2-1/2” backset. The case lock includes a latch bolt and deadbolt with all locks keyed alike. Spare keys are available by special order with the manufacturer. The E 2437 lock set is for use on right-hand, swing-in interior hung doors. Handing is determined from facing the door in the interior side of the door. Installation of the Prime-Line E 2437 polished brass lock set is easy, and all necessary parts are included. The polished brass lock set is an economical replacement for damaged or missing vintage lock sets that will perfectly complement the antique design of your home.

From the Manufacturer

This lock and keeper is constructed from cast steel. The steel knobs and rosettes comes plated in brass. It features a surface mount design and a skeleton key system.

Product Description

These vintage style door knobs are constructed of steel and come finished in a bright brass plating. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The shanks on these knobs include set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For SOLID BRASS knobs, kindly see Prime-Line’s model number E 2297. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are constructed from steel and come finished in brass. The knobs have a projection of 1-3/4 in. and a 9/32 in. square spindle. Easily fits on doors that are 1-3/8 in. thick.

Product Description

These vintage style door knobs are constructed of SOLID BRASS and come in a bright polished-brass finish. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The shanks on these knobs include 2 set screws (per shank) for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, door rosettes, trim and strike plates, or the latch and fasteners. For brass plated stamped steel knobs, kindly see Prime-Line’s model number E 2280. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are constructed from solid brass. They feature a 9/32 in. square spindle shaft. This style knob fits on old style bit key lock systems.

These vintage style door knobs are constructed of steel and come in a brass-plated finish. This set of knobs is designed for indoor use only, and it includes one 2-3/4 in. steel spindle, and one 3-5/8 in. steel spindle with 3/8 in. -20 threads. This colonial style knob set fits 1/4 in. square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. These knobs feature a wrought steel Colonial design, and they have a 2-1/4 in. outside diameter with a rope embossed design on their face. The knob shanks include setscrews for securing the knobs to the square spindle. All other components of matching vintage design must be purchased separately, to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: This item cannot be used on pre-bored doors that have large, newer style doorknob holes without first plugging them to receive this hardware. *Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) knob holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Replacement Door Knobs For Old Doors, eg:

• What are Top 10 Replacement Door Knobs For Old Doors for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Replacement Door Knobs For Old Doors to buy?
• What are Top Rated Replacement Door Knobs For Old Doors to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Replacement Door Knobs For Old Doors?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Replacement Door Knobs For Old Doors.
• Before deciding to buy any Replacement Door Knobs For Old Doors, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Replacement Door Knobs For Old Doors and What you should consider when buying the Replacement Door Knobs For Old Doors and Where to Buy or Purchase the Replacement Door Knobs For Old Doors. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Replacement Door Knobs For Old Doors of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Replacement Door Knobs For Old Doors.