techreviews1 
Nowadays, there are so many products of lab scale vacuum pump in the market and you are wondering to choose a best one.You have searched for lab scale vacuum pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings lab scale vacuum pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
ZENY 3,5CFM Single-Stage 5 Pa Rotary Vane Economy Vacuum Pump 3 CFM 1/4HP Air Conditioner Refrigerant HVAC Air Tool R410a 1/4" Flare Inlet Port, Blue
Amazon.com
- Inlet Port: 1/4" Flare, Warm note: 1)Pressure Scale:0~400psi, 0~140psi 2)Length of hose:1.2m Red:1/4''-1/4'' Yellow:1/4''-1/4'' Blue:1/4''-1/4'' Please make sure your manifold gauge is in accordance with this size. Any question in using, please contact seller first. *** A self-paying vacuum pump Adapter needed if inflet not suitable.
- High Efficiency and Low Noise, Heavy-duty Aluminum Alloy Casing, Oil Drain Plug Positioned at Bottom of Oil Reservoir,Internal High Volume Cooling Fan for Extended U
Super Deal 3.5CFM/4CFM/5CFM 1/4HP Air Vacuum Pump HVAC Kit AC A/C Manifold Gauge Set (3.5CFM+Manifold Gauge)
Amazon.com
- High Efficiency and Low Noise, Heavy-duty Aluminum Alloy Casing
- Oil Drain Plug Positioned at Bottom of Oil Reservoir,Internal High Volume Cooling Fan for Extended U
- Exhaust Port with Exhaust Cap, Direct Drive Motor Allowing Easy Starting Which is Maintenance Free
- Oil Sight Glass For Monitoring Oil Levels, ON/OFF Switch
- Non Slip Cushion Handle, Comes With a Bottle of Vacuum Oil
Specification:
Voltage /Frequency: 110V/60Hz
Flow Rate:VP125: 3.5 CFM(100L/MIN)
Ultimate Vacuum: 5 Pa (0.05mbar)
Power: 1/4HP
Inlet Port: 1/4″ Flare
Oil Capacity:320 ml
R134A
Working pressure ：500psi
Burst pressure ：2500psi
each hoses is aprox 5ft (60 inches) each with 1/4″ SAE fitting
Complete diagnostic and service gauge set for use on air condition systems (home or automotive)
Connect fittings with high pressure safety valve
2-1/2″ Gauges with proctive sleeve, has reading Celcius, R134A R22 R12 R502, PSI, and KG/cm2 (see picture)
Complete diagnostic and service gauge set for use on air condition system 10 Amps High Rate Charging.
ACME adapter 1/4″ (male) to 1/2″ (female)
Included: Color-coded gauges, valves, R134A quick adapter with ACME adapter, and hoses
ZENY 4CFM 1/3HP Electric Vacuum Pump Refrigerant R410a R134a HVAC Deep Vane Air Conditioner w/ 1/4" Flare Inlet Port
Kozyvacu AUTO AC Repair Complete Tool Kit with 1-Stage 3.5 CFM Vacuum Pump, Manifold Gauge Set, Hoses and its Acccessories
Amazon.com
- While a AC system requires 500micron ultimate vacuum, Kozyvacu TA350 delivers better than 150 micron to make sure that you can reach the vacuum meet your requirement.
- Full complete set for AUTO AC refrigerant recharging, include 1) A pressure gauge set, 1/4 Pressure Scale:0~400psi, 0~140psi 2) 3 hoses, with length of 4 ft, Red:1/4''-1/4'' Yellow:1/4''-1/4'' Blue:1/4''-1/4'' 3) Quick Coupler 4) R134a Can Tap is also included
F2C 3,5 CFM 1/4HP Single Stage Rotary Vane Vacuum Pump Air Conditioner Refrigeration HVAC Air Tool AC R410a Single-Stage (3,5CFM)
Kozyvacu 220lbs Digital Electronic Refrigerant Charging Weight Scales for HVAC/Auto AC Refrigerant Recovery Processing with Backlighting LCD Display, Free 9V Battery and a Portable Carrying Case
Amazon.com
- ▲High Accuracy and Resolution: +/- 0.5%
- ▲Three display mode: kgs, lbs and oz
- ▲Extra large LCD display with background lighting
- ▲Flexible long coil design, can be used for all refrigerants.
- ▲Previous auto shut off feature is removed to ensure you can monitor refrigerant weight changing consistently.
Robinair TIF9010A Slimline Refrigerant Electronic Charging/Recover Scale
Amazon.com
- OTC's TIF 9010A is a revised and updated version of the classic TIF Slimline scale, which brings greater performance, reliability, and usability to the trade
- With the greatest resolution in the industry, and no compromise on capacity, this unit offers features and specs that you won't want to do without
- Features touch key controls, auto zero, three display modes - lbs./oz., decimal lbs., kilograms
ABLAZE 5 Gallon Gal Vacuum Chamber Stainless Steel Degassing Urethanes Silicone Epoxies Lid Kit
Amazon.com
- Maintain high vacuum for over 24 hours
- Chamber tested before shipping
- LIFETIME warranty on Lid Seal and Chamber
- Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc
- Chamber Size: (L)11'' x (H)11" (Without Lid)
2-1/2" Oil Filled Vacuum Pressure Gauge – Stainless Steel Case, Brass, 1/4" NPT, Lower Mount Connection -30HG/0
USA Support
USA Brand
USA Stock
USA Services
Application: Water, Oil, Air & Hydraulic Application
Dial Size: 2-1/2″ Dial Size (Crimped Casing)
Accuracy: +/- 3/2/3%
Scale: Dual Scale – inHG / Bar
Movement: Copper Alloy
Bourdon Tube: Copper Alloy
Window: Polycarbonate
Case: Stainless Steel case for protection in harsh environments
Connection: Copper Alloy Lower Mount; 1/4″ NPT (for 2-1/2″ dial)
Normal Ambient Temp.: -4F to +140F (-20C to +60C)
Liquid Filling: Glycerin oil filled to enhance the reliability and integrity; helps dampen the effect of vibration and pulsation; lubricates the movement and extends the life of gauge.
California Prop 65 Warning: Brass components in this product contain lead, known to the state of California to cause cancer and birth defects or other reproductive harm. California law requires that this warning be given to consumers.
Winters PEM Series Steel Dual Scale Economical All Purpose Pressure Gauge with Brass Internals, 0-30 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount
Pilot Economical Chemical Resistant Diaphragm Vacuum Pump, 115V/60Hz, TLD3000
Blue Handheld Vacuum Pump with Gauge and 19.5" Tube – Eisco Labs
LeLuv Precise Gauge with Brass Male 1/8 inch Npt Fitting for Vacuum Pumps Brand
A high quality vacuum gauge that measures 0 to -30 inches Hg (mercury). 1/8 Inch NPT (National Pipe Thread) fitting
Milwaukee Instruments MP810 Dosing Pump for pH Controller, 110V
uxcell Bottom Mount Pressure Gauge, 0-200 psi/bar Dual Scale, 1-25/32" Dial Display, 1/8" NPT Male, with Brass Internals for Air Compressor Water Oil Gas
Amazon.com
- PRESSURE GAUGE - Pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/bar).The brass wetted parts are for measuring non-corrosive liquid and gas pressure
- DUAL SCALE - The gauge measures pressure with a dual scale of psi/bar
- 1-25/32" DIAL DISPLAY - The circular dial comes in 1.8" diameters. The dial has an aluminum black pointer.The lens is polycarbonate for high impact resistance
Specification:
Product Name : Pressure Gauge
Model : TS-Z52
Range : 0-200 PSI , 0-14 Bar
Dial Size : 1.8″ Dia
Connection: Copper Alloy Bottom Mount; 1/8″ NPT Male
Accuracy : 2.5 Level
Black Case Finish : Electrophoresis
Size : 50 x 28mm/2 x 1.1inch(D*L) (Not included thread)
Material : Electrophoresis iron , Copper Alloy , Plastic
Package Content:
1 x Pressure Gauge
Description:
1.Black electrophoresis iron case, Copper alloy dry internal parts
2.Application : This product is commonly used in various types of pneumatic device, such as air compressor, pneumatic tools. You can use it to measure air pressure, water pressure, oil pressure and so on.
Note:
Can not be used in (pure) oxygen, hydrogen, , can not be used in corrosive liquids, high-temperature liquids
1.The instruments should be properly maintained when using or handling, not intense vibration, avoid instrument damage.
2.Measuring the maximum working pressure range of not more than 70%.
3.Measuring the maximum working pressure is not higher than 50% when working on objects of intense vibrations.
4.The absolute error of precision table shoule be less 1/3 of the maximum permissible error of the checked table when use a precision table to verify.
5.In order to ensure the accuracy of instruments, inspection and verification should be carried out regularly.
uxcell Back Mount Pressure Gauge, 0-200 psi/kpa Dual Scale, 1-25/32" Dial Display, 1/4" NPT Male,with Brass Internals Iron Case for Air Compressor Water Oil Gas
Amazon.com
- PRESSURE GAUGE - Pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa).The brass wetted parts are for measuring non-corrosive liquid and gas pressure
- DUAL SCALE - The gauge measures pressure with a dual scale of psi/kPa
- 1-25/32" DIAL DISPLAY - The circular dial comes in 1.8" diameters. The dial has an aluminum black pointer.The lens is polycarbonate for high impact resistance
Specification:
Product Name : Pressure Gauge
Model : TS-50-14bar
Range : 0-200PSI , 0-14Bar , 0-1400kPa
Dial Size : 1.8″ Dia
Connection: Copper Alloy Center Back Mount; 1/4″ NPT Male
Accuracy : 2.5 Level
Black Case Finish : Electrophoresis
Size : 52 x 30mm/2.05 x 1.18inch(D*L) (Not included thread)
Material : Electrophoresis iron , Copper Alloy , Plastic
Package Content:
1 x Pressure Gauge
Description:
1.Black electrophoresis iron case, Copper alloy dry internal parts
2.Application : This product is commonly used in various types of pneumatic device, such as air compressor, pneumatic tools. You can use it to measure air pressure, water pressure, oil pressure and so on.
Note:
Can not be used in (pure) oxygen, hydrogen, , can not be used in corrosive liquids, high-temperature liquids
1.The instruments should be properly maintained when using or handling, not intense vibration, avoid instrument damage.
2.Measuring the maximum working pressure range of not more than 70%.
3.Measuring the maximum working pressure is not higher than 50% when working on objects of intense vibrations.
4.The absolute error of precision table shoule be less 1/3 of the maximum permissible error of the checked table when use a precision table to verify.
5.In order to ensure the accuracy of instruments, inspection and verification should be carried out regularly.
uxcell Bottom Mount Pressure Gauge, 0-100 psi/kPa Dual Scale, 2" Dial Display, 1/4" NPT Male, with Brass Internals for Air Compressor Water Oil Gas 3pcs
Amazon.com
- PRESSURE GAUGE - Pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa).The brass wetted parts are for measuring non-corrosive liquid and gas pressure
- DUAL SCALE - The gauge measures pressure with a dual scale of psi/kPa
- 2" DIAL DISPLAY - The circular dial comes in 2" diameters. The dial has an aluminum black pointer.The lens is polycarbonate for high impact resistance
Specification:
Product Name : Pressure Gauge
Model : TS-Z54
Range: 0-100 PSI , 0-7 Bar , 0-700kPa
Dial Size : 2″ Dia
Connection: Copper Alloy Bottom Mount; 1/4″ NPT Male
Accuracy : 2.5 Level
Black Case Finish : Electrophoresis
Size : 50 x 28mm/2 x 1.1inch(D*L) (Not included thread)
Material : Electrophoresis iron , Copper Alloy , Plastic
Package Content:
3 x Pressure Gauge
Description:
1.Black electrophoresis iron case, Copper alloy dry internal parts
2.Application : This product is commonly used in various types of pneumatic device, such as air compressor, pneumatic tools. You can use it to measure air pressure, water pressure, oil pressure and so on.
Note:
Can not be used in (pure) oxygen, hydrogen, , can not be used in corrosive liquids, high-temperature liquids
1.The instruments should be properly maintained when using or handling, not intense vibration, avoid instrument damage.
2.Measuring the maximum working pressure range of not more than 70%.
3.Measuring the maximum working pressure is not higher than 50% when working on objects of intense vibrations.
4.The absolute error of precision table shoule be less 1/3 of the maximum permissible error of the checked table when use a precision table to verify.
5.In order to ensure the accuracy of instruments, inspection and verification should be carried out regularly.
FLUKE-750PV4 Vacuum Pressure Module, 0 to -15 psi
Amazon.com
- Rugged construction, urethane over molding protects against shock if a module is accidentally dropped and also seals against dirt, dust, and moisture
- Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
- Temperature compensated from 0 °C to 50 °C (32 °F to 122 °F)
- Fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure. Modules are calibrated independently of the calibrator, and can be used with any 740, 750 or compatible 720 or 710 series calibrator.
