techreviews1 
Nowadays, there are so many products of kenmore water heaters electric in the market and you are wondering to choose a best one.You have searched for kenmore water heaters electric in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings kenmore water heaters electric which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Ariston GL6+S Electric Mini-Tank Water Heater
Amazon.com
- Keeps 7 gallons of hot water ready to go and draws only 12.5AMPS
- Must be hardwired into 120V
- Can be installed under the sink, on the floor or mounted on the wall
- A Pressure relief valve is included
- Ariston GL6+S replaces the Ariston GL6+, but the GL6+S does not come with a power cord while the GL6+ did
Amazon.com
The Ariston 6-gallon point-of-use electric mini-tank water heater eliminates the wait time for hot water to come from one or two sink faucets. You can install the heater independently or in-line with a larger water-heating source. You need no hard wiring to power your unit; simply plug it into any standard outlet and this heater’s ready to go. The glass-lined tank ensures long life, and the superior insulation provides quick recovery and greater energy efficiency. This 120-volt, 1500-watt water heater weighs 30 pounds and measures 14.5 x 17.5 x 17.5 inches. Ariston backs its heater with a manufacturer’s 6-year limited warranty for the heat exchanger and a 1-year limited warranty for parts.
From the Manufacturer
Installing an Ariston electric mini-tank water heater under the sink puts hot water right where you need it at the point-of-use. Lightweight and compact this heater is available in three space-saving sizes: 2.5, 4, and 6+ gallons. These heaters are aesthetic on the outside, glass-lined on the inside, and offer superior insulation for higher efficiency.
About Fluid Aluminum/Zinc Flexible Anode Rod Kit For Water Heaters | Includes Full Roll Of Teflon Tape | Easy-To-Follow Step-By-Step Instructions | (WITHOUT Cap) (WITHOUT Socket)
Amazon.com
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/ Zinc Alloy, instead of magnesium. This unique alloy works everyday, killing the bacteria responsible for the sulfur and rotten egg smelling gas.
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. WIN THE WAR ON SMELLY WATER!
Never have to explain that smell again!
2. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
3. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you!
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will have, plenty left-over for next time.
5. ONE SIZE FITS MOST. Most water heaters including: Rheem, Reliance, Richmond, Kenmore, State and GE, AO Smith and many more that use this “HEX TYPE” (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
6. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
7. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location with about a foot of overhead clearance.
8. RUGGED CONSTRUCTION. Anode Rod Segments are connected with 100 percent, 316 Stainless Steel Aircraft Cable and connectors that will never rust, corrode or break.
Camco 07033 LWD Therm-O-Disc Style Plumber’s Pack Water Heater Repair Kit
Kenmore 9000225015 Water Heater Heating Element, 3,800-watt Genuine Original Equipment Manufacturer (OEM) Part, 2-Pack
DeLonghi EW7707CM Safe Heat 1500W ComforTemp Portable Oil-Filled Radiator
Amazon.com
- LOWER ENERGY BILLS By heating only the room you’re in, you can lower your thermostat and lower your energy bills.
- NO ASSEMBLY REQUIRED Only De’Longhi has patented SmartSnap pre-assembled wheels that require no assembly and make it easy to move from room to room.
- COMFORT TEMP TECHNOLOGY Cuts your costs by automatically maintaining the optimal temperature and power settings.
- MAINTENANCE FREE SYSTEM The oil system is permanently sealed, so you never need to worry about refilling the heater.
Craft your ideal comfort zone with De’Longhi heaters. Warm, sweet home.
Camco 07023 Apcom Style Plumber’s Pack Water Heater Repair Kit
Product Description
Contains all the parts needed to repair or renew an electric water heater. Includes 2 each high watt density elements #0234,2 4500W 240V, 1 Apcom style lower thermostat with protector #07722, 1 Apcom style upper thermostat with protector #07862.
From the Manufacturer
The Camco HWD Plumber-Feet Pack Water Heater Repair Kit contains all parts needed to repair or renew an electric water heating system.
Reliance 9000507-045 Lower Electric Thermostat, Black
Product Description
9000507-045 Features: -Used with electric water heaters. -Finish: Black. -Made in the USA. Application: -Electric water heater. Product Type: -Thermostat. Finish: -Black. Country of Manufacture: -United States.
From the Manufacturer
Lower electric water heater thermostat for 2-element models
Camco 07843 Single Element Water Heater Thermostat with HLC
Amazon.com
- For single heating element applications
- Energy efficient range setting
- Built-in safety switch to help prevent the water heater from overheating
- Detailed instructions and wiring diagrams for easy installation
- Adjustable temperature range from 110F - 160F (factory preset to 120F)
Ultra Durable WR49X10173 Dispenser Water Tube Heater Kit Replacement by Blue Stars – Exact Fit for General Electric Hotpoint Kenmore fridge – Replaces PS1766223, 1381601, AP4318572
Amazon.com
- ✅
- MODEL NUMBER: WR49X10173 Dispenser Water Tube Heater Kit
- ✅
- EASY TO INSTALL - It is made exactly fit for most top name brand( General Electric Hotpoint Kenmore ) and replaces part numbers: PS1766223, 1381601, AP4318572
- ✅
- SAVE TIME SAVE MONEY - Inexpensive way to fix or repair a refrigerator
WR49X10173 Dispenser Water Tube Heater Kit by AMI PARTS Compatible with GE General Electric Hotpoint Kenmore fridge-Replaces PS1766223, 1381601, AP4318572
Amazon.com
- [Parts Number]：WR49X10173 Dispenser Water Tube Heater Kit
- [Compatible Brands]: General Electric Hotpoint Kenmore fridge
- [Replaces Part]: PS1766223, 1381601, AP4318572
- [Fixes Symptoms]: Not dispensing water
- [Quality Warranty]:The replacement part is made from durable high quality material and well-tested by manufacturer.For any reason you’re not satisfied,you can ask for a replacement or full refund.
WR49X10173 Dispenser Water Tube Heater Kit.Refrigerator Water Dispenser Tube Heater Kit. Helps prevent frozen water lines. Works with GE refrigerator model numbers starting with BSS, DSS, ESH, GSH, GSS, GST, HSS, and SSS.
Replaces Fit Models: PS1766223, 1381601, AP4318572
This part works with the following products: Refrigerator
This part works with the following brands: General Electric Hotpoint Kenmore fridge
Reliance 9001954-045 Upper Electric Thermostat with ECO, Pack of 1, Black
Product Description
9001954-045 Features: -Used with electric water heaters. -Finish: Black and brass. -Made in the USA. Application: -Electric water heater. Product Type: -Thermostat. Finish: -Black and brass. Country of Manufacture: -United States.
From the Manufacturer
Upper electric water heater thermostat for 2-element models
Camco 02292/02293 3800W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3800W, 240V, Water Screw-In Heater Element, High Watt Density, Fits Most Models Of American, A.O. Smith, Bradford White, Craft Master, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-flo, Reliance, Rheem, Richmond, Ruud, Sears, State, & Whirlpool Heaters, Gasket Included, Detailed Instructions Included, Minimum Tank Diameter 15”, UL Listed, 1 Year Warranty.
From the Manufacturer
Camco’s 3800W 240V screw-in type high watt density water heater elements can be used in most replacement situations if the same wattage and voltage are used. High Watt Density elements are the most common and the same type of elements provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements are universal replacement parts that fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02583 4500W 240V Screw-In Foldback Water Heater Element – Low Watt Density
Product Description
02583 Wattage: 4500 Features: -Screw-In Element.-Element comes with one gasket.-Carded.-8″ Minimum tank diameter.-150+ Watts per square inch. Specifications: -1500W Voltage: 120.-2000W Voltage: 240. Dimensions: -Dimensions: 14.5″H x 3.63″W x 1.75″ D.
From the Manufacturer
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
Amazon.com
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS - Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN - This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
ZERO KSD203 Upper Water Heater Thermostats, SPDT for Dual Element tanks, UL Recognized, T-O-D Style
Camco 8123 Lower Thermostat
Product Description
08123 Features: -Thermostat.-Energy efficient range setting.-Built-in safety switch to prevent overheating.-Adjustable, carded.-UL listed. Dimensions: -Dimensions: 8.5″H x 3.63″W x 1.25″D. Warranty: -1 Year warranty.
From the Manufacturer
Lower Thermostat 08123.
44 Inch Flexible Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Water Heater Anode Rod for GE, Rheem, Reliance, Richmond, Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon
Amazon.com
- GET RID OF ROTTEN EGG SMELL - Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE - Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
Camco 07723 WH9 Lower Thermostat – Apcom Style
Product Description
The Camco 07723 Apcom style lower thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 Fahrenheit to 160 Fahrenheit, adjust only the lower thermostat. Meets original specification lengths for American, AO Smith, Bradford White, GE, GSW, Kenmore, Maytag, Reliance, Rheem, Richmond, Rudd, Sears, State, and Whirlpool
From the Manufacturer
Lower Thermostat 07723.
Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
