Best Kenmore Washing Machine Leaking Water From Underneath

Nobody Likes Doing Dishes When the Dishwasher is Broken and Leaking!!! 

If your dishwasher is leaking underneath, chances are that your Diverter Valve Seal is leaking.  Don’t worry, it’s a QUICK and EASY repair – This seal is what you need and it SHIPS FAST and FREE so you don’t have to do those dishes by hand any more!!  Buy this genuine part from The Grommet Guruand take care of that leak right away!!!

This BRAND NEW Industrial Grade Dishwasher Diverter Valve Seal Grommet is a direct replacement for Whirlpool part number WPW10195677 or W10195677.  This new seal grommet will fit common brands made by the following manufacturers:

• Whirlpool
• KitchenAid
• Maytag
• Amana
• Hotpoint
• Jenn-Air
• Estate
• Roper
• Admiral
• Inglis
• Magic Chef

This seal grommet installs under the Diffuser and around the Diverter Motor Shaft and will fix that leak!  The repair is quick and fairly easy for anyone who is somewhat handy.  This gasket will prevent you from having to buy the expensive Diverter Motor or the entire Sump Assembly and will save you hundreds of dollars in dishwasher repair service costs.  

General repair instructions will be included!!

This Diverter Valve Seal Grommet Seal is made of Industrial Grade Nitrile Butadiene Rubber and can withstand 248F.  Its inner wall is reinforced with a garter spring which ensures seal integrity under load.

Specs:

• Inner Diameter: 5.5mm
• Outer Diameter: 16mm
• Width Diameter: 8mm
• Seal Material : Nitrile Butadiene Rubber
• Temperature Range : -40F to 248F

Note: Keep in mind this gasket will only repair a leaky diverter motor shaft seal. 

MESSAGE US TO VERIFY FITMENT!!!

Description:

Washing machine water inlet valve for top-loading units. Valve has multi-mount bracket & outlet adaptor. If the valve malfunctions, the precise amount of water may not be pumped into the washing machine, causing your clothes to not be properly washed. In this case, the valve should be replaced.
The water inlet valve on your washing machine allows water to flow into the washtub when the electrical current sends a signal to the solenoid and opens the mixing valves. Your water temperature selection determines whether the hot water valve or the cold water valve opens. When water fails to fill the washtub during the wash cycle or you discover standing water in the tub between washes, you need to replace the water inlet valve on the machine.

Replaces the following part numbers:

285805VP, 292197, 3349451, 3354565, 3360387, 3360388, 3360389.

Works with most top name brand:

Whirlpool, Maytag, Alliance, GE, Kenmore, Amana, Admiral, Roper, Estate, Inglis, Crosley.

Specifications:

Working voltage: 110 VAC/ 120 VAC
Length: 4.33 inch/ 11 cm
Width: 2.8 inch/ 7 cm
Height: 2.8 inch/ 7 cm

Fixes the following symptoms:

Will not stop filling with water
No hot or cold water
Will not fill with water
Leaking

Install tip:

Avoid the water or dust to the installation contact surface.

Package include:

1 x 285805 Water inlet valve

The Kenmore 26132 4.8 cu. ft. Top Load Deep Washer helps make laundry day less of a hassle. From bulky loads of towels to soiled delicates, this 4.8 cu. ft. Kenmore washer can adapt to different sized loads, eliminate hand-washing, and improve overall cleaning performance. It’s 4.8 cu. ft. capacity can handle the tough stuff, even that comforter, so you can get laundry done right at home; no more trips to the laundromat to use the jumbo washers. StainBoost and the Kenmore Triple Action Impeller gets your clothes clean, clean, clean while the Deep Fill option optimizes water levels for larger, bulkier loads. Kenmore’s Triple Action Impeller uses a 3-part wash motion to make easy work out of tough laundry. Wash basket motion, 9 powerful spray jets, and a burst of concentrated detergent ensure a better overall clean for your laundry using less water. Kenmore’s StainBoost option takes the tough work out of tough stains with an extended wash time and gentle care, no pre-treatment required. The Deep Fill feature adapts water levels to optimize washing for large, bulky loads in a single cycle, no more re-washing or wasting water. This Kenmore Top Load Washer is ENERGY STAR certified so you can rest easy knowing you’re wasting less resources without sacrificing cleaning power. Spend less time hovering over your laundry machines with the Kenmore 4.8 cu. ft. top load washer. Here are some tips to avoid white residue while washing. Use liquid HE detergent to the first line of the cap. If using HE powder detergent or pods make sure to add it to the tub before adding clothes to allow it to dissolve properly. Do not overload the machine. Use a cycle other than “Normal” like “Heavy Duty” or “Bulky” while avoiding “Express” when necessary. Use the “Deep Fill” option and/or the “Fabric Softener” option, if available, as these options will add more water to the cycle. Use cooler water temperatures, but not “tap cold” as detergent requires 60 degree water to dissolve. Add up to 2 extra rinses. Additional notes include using the clean washer cycle if the washer is not new. If these tips do not fix the issue, a service technician should be called to evaluate.