Best Kenmore Washer Operating Instructions

FRONT LOAD WASHER BEARING KITS (our Amazon seller name) is the brand name owner and only authorized seller of the brand “Front Load Bearings” At checkout be sure you are buying from FRONT LOAD WASHER BEARING KITS. Quality and customer service is our number one priority, ALWAYS!

If you are not sure if this part will work for your washer please contact me with your model number and i will check for you. All of my bearing sets have ABEC 5* grade ball bearings by NACHI and made in Japan. I have personally installed over 500 of these bearing and seal sets myself. The fastest washer out there spins at 1500 RPM and my bearings and seals are rated for more than 6 times that speed and load. The smallest bearings I use are rated for 1740 LBS and the bigger bearings go up to over 4700 LBS. That’s more weight than a Minivan. As for my seals, I buy them from Taiwan, Germany, and Japan depending on the size and availability. (USA made seals are not available in these sizes) All my seals are high quality, fully sprung, double lip seals and are the same ones I have been using for 6 years on my own machines. And please don’t forget…… I give a 5 YEAR WARRANTY and UNLIMITED TECH SUPPORT. *(ABEC)-Annular Bearing Engineering Committee. The ABEC scale is the industry accepted standard for the tolerances of ball bearings.

Erie Tools 3.1 GPM 3000 PSI Triplex Pressure Power Washer Pump for Hot Cold Water Cat General AR MITM

Erie Tools triplex 3/4-inch hollow shaft pressure washer pump for Cat General AR. This pressure washer pump has a forged brass manifold and a ceramic-coated plunger. The Erie Tools 1506-5A offers a 3.1 GPM flow rate and a maximum pressure of 3,000 PSI (206 BAR). This pump requires an input of 3,400 RPM and 6.5 HP.

• High-pressure triplex pump 15 Series.
• 3/4-inch hollow shaft pressure washer pump.
• Maximum Pressure: 3,000 PSI (206 Bar)
• Flow Rate: 3.1 GPM
• Requires: 3,400 RPM and 6.5 HP
• Inlet: 3/4 in.
• Outlet: 3/8 in. Quick Disconnect
• Forged Brass manifold provides high strength and corrosion resistance.
• Anodized aluminum die-cast crankcase with a large cooling fin for maximum heat dissipation.
• Hardened and precision-ground steel alloy crankshaft for maximum durability.
• Aluminum alloy connecting rod.
• Ball and needle bearing for even load distribution.
• Ceramic-coated plunger to increase resistance to pitting and wear.
• Plunger seals are Germany Parker U Type with duplex packing.
• Bolt on unloader with internal bypass pressure trap type.

SPECIFICATIONS
The 285785 washer clutch assembly is found in your washing machine and is responsible for spinning the basket during the spin cycle. This repair requires a half inch 1/16th socket with an extension and a ratchet, a pair of channel lock pliers, a Phillips screwdriver, medium size flat blade, a small flat blade, and a 1/4 inch nut driver.

Works with most top name brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Maytag, Inglis, Crosley, Amana, Admiral, Magic Chef.

Fixes the following symptoms:
Does not spin.
Spins slowly.
Will not agitate.
Excessive Noise.
Burning smell.
Will not drain.
Shakes and moves excessively.

Count on our 285785 Washer Clutch Kit Replacement for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

The 285785 washer clutch system spins the internal tub during the washing cycle. During the washing process, the clutch controls the tub’s agitator and spinning. This washer clutch can become worn or broken over time.

The Kenmore 26132 4.8 cu. ft. Top Load Deep Washer helps make laundry day less of a hassle. From bulky loads of towels to soiled delicates, this 4.8 cu. ft. Kenmore washer can adapt to different sized loads, eliminate hand-washing, and improve overall cleaning performance. It’s 4.8 cu. ft. capacity can handle the tough stuff, even that comforter, so you can get laundry done right at home; no more trips to the laundromat to use the jumbo washers. StainBoost and the Kenmore Triple Action Impeller gets your clothes clean, clean, clean while the Deep Fill option optimizes water levels for larger, bulkier loads. Kenmore’s Triple Action Impeller uses a 3-part wash motion to make easy work out of tough laundry. Wash basket motion, 9 powerful spray jets, and a burst of concentrated detergent ensure a better overall clean for your laundry using less water. Kenmore’s StainBoost option takes the tough work out of tough stains with an extended wash time and gentle care, no pre-treatment required. The Deep Fill feature adapts water levels to optimize washing for large, bulky loads in a single cycle, no more re-washing or wasting water. This Kenmore Top Load Washer is ENERGY STAR certified so you can rest easy knowing you’re wasting less resources without sacrificing cleaning power. Spend less time hovering over your laundry machines with the Kenmore 4.8 cu. ft. top load washer. Here are some tips to avoid white residue while washing. Use liquid HE detergent to the first line of the cap. If using HE powder detergent or pods make sure to add it to the tub before adding clothes to allow it to dissolve properly. Do not overload the machine. Use a cycle other than “Normal” like “Heavy Duty” or “Bulky” while avoiding “Express” when necessary. Use the “Deep Fill” option and/or the “Fabric Softener” option, if available, as these options will add more water to the cycle. Use cooler water temperatures, but not “tap cold” as detergent requires 60 degree water to dissolve. Add up to 2 extra rinses. Additional notes include using the clean washer cycle if the washer is not new. If these tips do not fix the issue, a service technician should be called to evaluate.