Best Kenmore Washer 70 Series Lid Switch

Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won’t spin but will still agitate, the lid switch is likely defective.

The 3949238 washer door switch signals to your washing machine that the door is open or closed. It prevents your washer from starting a cycle while the door is open and also shuts off the washer’s cycle as soon as the door opens. When this part breaks, your washer won’t work. Luckily, this repair is quick, easy, and budget-friendly. The PartsBroz washer door switch is a functional equivalent to part 3949238 and works with many Whirlpool and Kenmore washing machines.

Installation Tips

Before the repair, disconnect the water and power sources from your washing machine. You’ll need a putty knife, Phillips screwdriver, flat head screwdriver, towel, and 5/16-inch nut driver to complete the repair.

30-Minute Fix

Restore life to your washer on your own time. Installing a new lid switch takes less than 30 minutes to do. It fixes a number of common problems including:

• Washer won’t start
• Washer won’t drain
• Washer won’t agitate
• Washer pumps but won’t spin
• Washer won’t fill up with water
• Timer won’t advance

Compatible Whirlpool and Kenmore dryer models include but are not limited to:

11023832100 11026902690 11027802690 11027812692 11026702690 11023812100 11026912690 11024642300 11028812790 11028882790 11029852991 11022622100 11022642100 11028803890 11023822100 11024422300 11026952690 11027822790 11026722690 11026901690 11028902790 11028922790 11022422100 11022632100 11026822690 11029842991 11026292692 11026712690 11026809690 11029812890 11022442100 11024622300 11024632300 11026808690 11026812690 11026892690 11028912790 11028922791 11016512690 11023902200 11024832200 11026832690 11026901692

Replaces Several Part Numbers: 3949238, PS350431 and AP3100001.

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section or send us a message on the PartsBroz storefront.

SPECIFICATIONS

– The 3949238 Washer Lid Switch Assemply part comes with a three-wire lead wire harness. The lid switch tells the machine that the lid is closed. If the machine does not detect a closed lid it will not spin.

Works with the majority of name brand washers: Kenmore, Whirlpool

Replaces part number: PS350431 AP3100001

Resolves the following issues:
Wont spin
Will not drain.
Will not Start.
Pumps will not spin.
Timer does not advance.
Will not agitate.
Will not fill with water.

Buy today and get your washer back to working order. Click “Add to Cart” now!

The 3949238 Washer Lid Switch Replacement part comes with a three-wire lead. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
Works with most top name brands:Kenmore, Whirlpool

Replaces part number: PS350431, AP3100001
Fixes the following symptoms:
Will not drain.
Will Not Start.
Pumps but will not spin.
Timer will not advance.
Will not agitate.
Will not fill with water.

If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Product Description

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 394238 Washer Lid Switch.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 394238 Washer Lid Switch

12 Pack 80040 agitator dogs:
These 80040 agitator directional cogs are commonly referred to as dog ears, they are usually applied with direct drive washing machines.

Suitable for most major brand washer:
The agitator dogs work with Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Crosley, Maytag washer.

Replaces part number:
Part number 80040 replaces 387091, 3366877, 285612, 285770, 3109, AH388034, EA388034, PS388034, 80040, AP3119063.

Fixes the following symptoms:
1. Will not agitate.
2. Noisy.
3. Pumps but will not spin.
4. Spins slowly.
5. Shakes and moves.
6. Not cleaning dishes properly.
7. Will not drain.
8. Marks left on clothes.
9. Does not dispense fabric softener/ detergent.

Specifications:
Quantity: 12 packs
Material: plastic
Size: 2.3 x 1 x 1 cm/ 0.9 x 0.4 x 0.4 inch

Package includes:
12 x Washer agitator dog

SPECIFICATIONS
The 80040 Washer Agitator Dogs replacement kit come in a package of four and are generally found in washers where the motor is connected directly to the washer. The agitator is what causes the thrusting motion in your washer. If you have noticed that your washer is not draining properly, is making unfamiliar noises, shaking, or is simply not washing properly, it could be due to faulty agitator directional cogs. They can be found by simply removing the softener dispenser and then removing the agitator cap. For this repair, you will need a 1/4 or a 3/8ths socket set, and needle nose pliers.

Works with most top name brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Crosley, Maytag.

Replaces part number: 285612, 285770, 3109, 3366877, 387091, 80040, 80040VP, 99989668, AP3119063, ER80040, SB80040.

Fixes the following symptoms:
Will not agitate.
Noisy.
Pumps but will not spin.
Spins slowly.
Shakes and moves.
Not cleaning dishes properly.
Will not drain.
Marks left on clothes.
Does not dispense fabric softener / detergent.

Count on our 80040 Washer Agitator Dogs replacement kit for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront — click the “Blue Stars LLC” on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

This contractor pack is a 4 piece set which includes 4 lid switch assemblies. This kit is designed for landlords, technicians, repair companies, and/or service companies. Stock up on this very popular lid switch at a bargain price through this contractor pack. These are compatible with Whirlpool brands which include Roper, Kenmore/Sears, Maytag, KitchenAid, Amana, Jenn-Air, and many more. *This is not a Whirlpool OEM product. The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”