Best Braun Series 7 Replacement 740S

Get your shaver back to 100% performance with the Braun Series 7 70s replacement head. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this shaver head you will get back to the superior close shave you have come to expect from Braun. Get more details on razor heads at braun website

Small investment, peak performance Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs. In accomplishing this substantial task, the cutting parts will gradually wear out and your shave may become less close and comfortable. That’s why Braun recommends changing your shaver’s foil and cutter block every 18 months to maintain your shaver’s maximum performance. For an efficient shave every day.How to replace your shaver head? For older models which have a foil and a cutter block as two independent parts you will need to change the parts in two steps: First remove the foil, either by pressing the release button if your shaver has one, or by pulling the foil. Next rotate the cutter block by 90 degrees and pull it off, holding it at the ends to avoid touching the blades. To fit new parts, simply carry out the same procedure in reverse.

• Fits all Pulsonic and Series 7 models: 720, 730, 740, 760CC, 790CC, 790-3cc, 795-3cc, 8785, 9565, 9566, 9585, 9595, 9781, 9782, 9785, 9795, 7790-cc, 7797cc-7, 7760cc-4, 7799cc-6, 7840, 7850, 7880, 7893, 7898, 7899
• Fits Types: 5671, 5673, 5674, 5692, 5693, 5694, 5695, 5696, 5697

Note: Part is fragile and installation requires significant disassembly of shaver and a high degree of mechanical competence is needed.

color may vary

Braun replacement heads help you get back 100% of your shaver’s performance. Braun recommends changing your shaver’s blades every 18 months as the cutting parts will gradually wear out over time and your shave may become less close and comfortable. Replacing your shaver head helps your shaver maintain maximum performance.

Get your shaver back to 100% performance with the Braun Series 3 30b replacement head. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this replacement head you will get back to the superior close shave you have come to expect from Braun. Get more details at www.braun.com.

Blades should be replaced every eighteen months;Made in Germany;For optimum performance; clean regularly. Brings back 100% performance;Fit’s Braun Pulsonic Prosonic 9000 Series 7 range of shavers

Designed For:Braun Pulsonic 9565, 9585, 9595 ¦ Braun Series 7 720, 730, 760CC, 790CC, 790cc BOSS Edition, 790CC Porsche Motorsport edition

Product Description

Get your shaver back to 100% performance with the Braun 10b replacement head. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this replacement head you will get back to the superior close shave you have come to expect from Braun. Get more details at www.braun.com.

Amazon.com

Braun replacement foil & cutter blocks help to maintain your shaver’s maximum performance. Braun recommends changing your shaver’s blades every 18 months as the cutting parts will gradually wear out over time, and your shave may become less close and comfortable. After replacing them you get back 100% of your shaver’s performance.

Product Overview

Comparision Table

Foil & Cutter Accessories

Cassette Accessories

The World of Braun

Since its inception in 1921, Braun has challenged the very conventions that define design. State-of-the-art technological innovations are wrapped in pure artistry, honoring both the passion and precision of the ultimate shaving experience. Our unique goal is to create those select products that make a difference in people’s lives. Products that engage and excite, creating a “Braun moment” in their own unique way. For men, that effort begins by creating shavers and trimmers that enhance their best look. For women, we strive to engineer epilators and hair care products that pair performance and comfort. This is how Braun goes beyond design to become something more. 

Braun. Designed to make a difference. 

Braun 5692-4 This is a Repair or Service Part to replace existing charging base that has failed. Charging Base Only – Does Not Include Cord, Instructions, or any other accessories. Only fits 760CC, 760CC-3, 760CC-4, 760CC-5 765CC, 765CC-3, 765CC-4, 765CC-5 790CC, 790CC-3, 790CC-4, 790CC-5, 790cc-7 795CC, 795CC-3, 799cc, 799cc-6, 799cc-7 9585, 9785, 9595, 9795 Type numbers (found under the pop up trimmer) 5671, 5672, 5673, 5675, 5692, 5693, 5694, 5696 Clean & Renew,Pulsonic, Prosonic, Active Power, 5675, 5671, 5672, 5673, 5692, 5693, 5694, 5696

• Fits Models: 190, 320, 330, 340, 350, 350CC, 360, 370, 370CC, 380, 390, 390CC, 1715, 1775, 2775, 2776, 2864, 2865, 2866, 2874, 2876, 2778, 4740, 4745, 4775, 4776, 5585, 5611, 5612, 5613, 5614, 5663, 5691, 5887, 5885, 5790, 5795, 5796, 5770, 5771, 5772, 5774, 5775, 5776, 5779, 5790, 5873, 5874, 5875, 5876, 5877, 5878, 5884, 5885, 5886, 5895, 5897, 6610, 6620, 6680, 6690
• Fits Types: 5325, 5496, 5708, 5710, 5713, 5714, 5720, 5721, 5722, 5723, 5724, 5729, 5730, 5733, 5735, 5737, 5738, 5739, 5742, 5747, 5772, 5773, 5774, 5775, 5776, 5779, 5759, 5720, 5692, 5693, 5694, 5695, 5696, 5697
• For Models/Types: 5671, 5673, 5674, 5675, 5693, 720, 720s, 730, 740, 760, 760cc, 790, 790cc, 799cc, 799cc-6, 9565, 9566, 9585, 9781, 9782, 9785, 9595, 9795, 7790, 7797, 7760, 7799, 7840, 7850, 7880, 7893, 7898, 7899
• Fits directly into shaver or clean and charge base (where applicable)

NOTE: Check the type number printed on the shaver and make
sure it matches one of the type numbers listed above,
do not refer to the model number only

Foil & Cutter Head Replacement Pack for BRAUN 5000/6000 Series Shavers, Fits both 5000 Series Shaver and 6000 Series Shaver, Made in Germany, For optimum performance; clean regularly. Brings back 100% performance, Blades should be replaced every eighteen months

Product Description

Get your shaver back to 100% performance with the Braun Series 3 32s replacement head. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this shaver head you will get back to the superior close shave you have come to expect from Braun. Get more details on razor heads at www.braun.com.

Amazon.com

Braun replacement foil & cutter blocks help to maintain your shaver’s maximum performance. Braun recommends changing your shaver’s blades every 18 months as the cutting parts will gradually wear out over time, and your shave may become less close and comfortable. After replacing them you get back 100% of your shaver’s performance.

Product Overview

Comparision Table

Foil & Cutter Accessories

Cassette Accessories

The World of Braun

Since its inception in 1921, Braun has challenged the very conventions that define design. State-of-the-art technological innovations are wrapped in pure artistry, honoring both the passion and precision of the ultimate shaving experience. Our unique goal is to create those select products that make a difference in people’s lives. Products that engage and excite, creating a “Braun moment” in their own unique way. For men, that effort begins by creating shavers and trimmers that enhance their best look. For women, we strive to engineer epilators and hair care products that pair performance and comfort. This is how Braun goes beyond design to become something more. 

Braun. Designed to make a difference. 

Braun 7000-Series Syncro Shaver Replacement Foil & Cutter Set contains foil and cutterblock. Replacing the Foil and Cutter Block every 18 months will ensure that you are getting the close, quick and comfortable shave you expect from your Braun Shaver Fits all Braun Syncro Shavers.

Replacing your blade gives a 25% better shave; therefore blades should be replaced every eighteen months.

Braun replacement heads help you get back 100% of your shaver’s performance. Braun recommends changing your shaver’s blades every 18 months as the cutting parts will gradually wear out over time and your shave may become less close and comfortable. Replacing your shaver head helps your shaver maintain maximum performance.