Best Braun 8975 Series 5

Retain your comfortable shave with this Braun replacement head. Its foil and cutter quickly snap into your original Braun razor so you continue to experience smooth performance and a soothing shave. This Braun replacement head has precise cutting blades to provide a close trim, and the foil protects sensitive skin.

To bring back 100% shaving performance, replace your foil and cutterblock every 18 months. Change both parts at the same time for a closer shave with less skin irritation. This foil and cutterblock is for 360 Complete models 8995, 8985 and 8975.

Braun replacement heads help you get back 100% of your shaver’s performance. Braun recommends changing your shaver’s blades every 18 months as the cutting parts will gradually wear out over time and your shave may become less close and comfortable. Replacing your shaver head helps your shaver maintain maximum performance.

BRAUN Replacement foil and Cutter Fits Braun Models: 5020, 5020s, 5030, 5030s, 5040, 5040s, 5050, 5050cc, 5070, 5070cc, 5090, 5090cc ONLY!

Braun Series 5 Shaver Head Cassette

Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs-equivalent to shaving an entire soccer field. Therefore, Braun recommends changing your shaver’s foil & cutter block every 18 months to maintain your shaver’s maximum performance. For a perfect shave every day. Fits Braun Series 5 Models: 5020, 5020s, 5030, 5030s, 5040, 5040s, 5050, 5050cc, 5070, 5070cc, 5090, 5090cc.

Braun Electric Shavers
Designed and tested to last for six years of ultimate mens shaving with proper maintenance

UltraActiveLift Middle Trimmer
Effectively captures problem hairs, neck and chin areas, Unique oscillating trimmer lifts and cuts flat-lying hairs in fewer strokes

CrossHair Designed Foil
Outstanding closeness captures stubborn hairs growing in different directions and even the shortest stubble

MacroMotion Shaving
Features 40° pivoting shaver head navigates larger contours for maximum skin contact

Features

Braun Series 5 Replacement Shaver Head Cassette
Ultra-Active-Lift Middle Trimmer cuts neck and chin hairs
CrossHair Designed Foil captures stubborn hairs
MacroMotion Shaving
Features 40° pivoting shaver head navigates larger contours of your face
Designed for Braun Series 5 Models: 5020, 5020s, 5030, 5030s, 5040, 5040s, 5050, 5050cc, 5070, 5070cc, 5090, 5090cc

Technical Specifications

Offers remarkable shaving precision in both wet and dry conditions
Replacing your blade gives a 25% better shave
For optimum performance; clean regularly
Blades should be replaced every eighteen months
Brings back 100% performance Guaranteed!

Fits Braun Series 5 Models: 5020, 5020s, 5030, 5030s, 5040, 5040s, 5050, 5050cc, 5070, 5070cc, 5090, 5090cc

To bring back 100% shaving performance, replace your foil and cutterblock every 18 months. Change both parts at the same time for a closer shave with less skin irritation.

This replacement foil and cutter combo pack will fit the following Braun shavers model No. Series 5 ranges (550, 560, 570cc, 590cc), 8985, 8995 & 8975.; Foil and cutterblock.; Fit’s Braun Series 5, 360 Complete & Activator range of shavers.; Blades should be replaced every eighteen months.; Replacing your blade gives a 25% better shave. For optimum performance, clean regularly.; Brings back 100% performance.; (Formerly 8000 360 Complete or Activator)

Get your shaver back to 100% performance with the Braun Series 51S replacement head and foil and cutter. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this replacement head you will get back to the superior close shave you have come to expect from Braun. Small investment, peak performance Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs. In accomplishing this substantial task, the cutting parts will gradually wear out and your shave may become less close and comfortable. That’s why Braun recommends changing your shaver’s foil and cutter block every 18 months to maintain your shaver’s maximum performance. For an efficient shave every day How to replace your shaver head? For older models which have a foil and a cutter block as two independent parts you will need to change the parts in two steps: First remove the foil, either by pressing the release button if your shaver has one, or by pulling the foil. Next rotate the cutter block by 90 degrees and pull it off, holding it at the ends to avoid touching the blades. Please note this product is supplied in Retail Packaging Packaging Replacement Foil & Cutter for Braun models: This replacement part is suitable for the following series 5, 360 complete model numbers: 590cc, 570cc, 560, 550, 8995, 8990, 8985, 8975, 8970 Model compatible – 8995, 8890, 8985, 8975, 8970, 8595,8590,8585. 590cc, 570cc,560,550.

The Braun 67030720 Power Cord fits models

For models 8320s, 8325s, 8330s, 8340s, 8345s, 8350s, 8360cc, 8365cc, 8370cc, 8371cc, 8380cc,8385cc, 8390cc, 8391cc only

• Fits Models: 190, 320, 330, 340, 350, 350CC, 360, 370, 370CC, 380, 390, 390CC, 1715, 1775, 2775, 2776, 2864, 2865, 2866, 2874, 2876, 2778, 4740, 4745, 4775, 4776, 5585, 5611, 5612, 5613, 5614, 5663, 5691, 5887, 5885, 5790, 5795, 5796, 5770, 5771, 5772, 5774, 5775, 5776, 5779, 5790, 5873, 5874, 5875, 5876, 5877, 5878, 5884, 5885, 5886, 5895, 5897, 6610, 6620, 6680, 6690
• Fits Types: 5325, 5496, 5708, 5710, 5713, 5714, 5720, 5721, 5722, 5723, 5724, 5729, 5730, 5733, 5735, 5737, 5738, 5739, 5742, 5747, 5772, 5773, 5774, 5775, 5776, 5779, 5759, 5720, 5692, 5693, 5694, 5695, 5696, 5697
• For Models/Types: 5671, 5673, 5674, 5675, 5693, 720, 720s, 730, 740, 760, 760cc, 790, 790cc, 799cc, 799cc-6, 9565, 9566, 9585, 9781, 9782, 9785, 9595, 9795, 7790, 7797, 7760, 7799, 7840, 7850, 7880, 7893, 7898, 7899
• Fits directly into shaver or clean and charge base (where applicable)

NOTE: Check the type number printed on the shaver and make
sure it matches one of the type numbers listed above,
do not refer to the model number only

• For Series 9 models 9030s, 9040s, 9093s, 9050cc, 9070cc, 9075cc, 9080cc, 9090cc, 9095cc, 9240s, 9242s, 9250cc, 9260s, 9293s, 9299s, 9280cc, 9290cc, 9291cc, 9292cc, 9293s, 9295cc, 9296cc, 9297cc, 9299cc
• Fits Models:  5020s, 5030s, 5040s, 5050cc, 5070cc, 5090cc, MG5090, 190, 195, 197, 199, 1715, 1775, 2775, 2776, 2838, 2864, 2865, 2866, 2874, 2876, 4740, 4745, 4775, 4776, 5610, 5611, 5612, 5613, 5614, 5663, 5691, 5736, 5790, 5791, 5795, 5796, 5770, 5771, 5790, 5774, 5775, 5776, 5873, 5874, 5875, 5876, 5877, 5884, 5885, 5886, 5887, 5888, 5895, 5897, 6610, 6620, 6680, 6690, 395CC, 390CC, 390CC-4, 380S-4, 380, 370CC-4, 370CC, 370, 360, 350S-4, 350CC, 340, 345S-4, 330S-4, 330, 320S-4, 320, 310s, 300s, 3050CC, 3070CC, 3010s, 3040s, 3045s, 3080s
• Fits Types: 5496, 5325, 5408, 5409, 5411, 5412, 5414, 5415, 5416, 5708, 5710, 5713, 5714, 5720, 5721, 5722, 5723, 5724, 5729, 5730, 5733, 5735, 5737, 5738, 5739, 5742, 5743, 5748, 5759, 5772, 5773, 5774, 5775, 5776, 5779, 5783
• Fits Z30, Z40, Z50, Z60, Cruzer2, Cruzer3, Cruzer4, Cruzer5 Face, Cruzer6 Face
• For CoolTec models CT2, CT3, CT4, CT5, CT6, 5676
• Also can be used with Pulsonic Series 7 Models/Types: 5671, 5673, 5674, 5675, 5693, 720, 720s, 730, 760, 760cc, 790, 790cc, 9565, 9566, 9585, 9781, 9782, 9785, 9595, 9795 but does not have crook end

  Product color may vary

Get your shaver back to 100% performance with the Braun Series 51S replacement head and foil and cutter. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this replacement head you will get back to the superior close shave you have come to expect from Braun. Small investment, peak performance Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs. In accomplishing this substantial task, the cutting parts will gradually wear out and your shave may become less close and comfortable. That’s why Braun recommends changing your shaver’s foil and cutter block every 18 months to maintain your shaver’s maximum performance. For an efficient shave every day How to replace your shaver head? For older models which have a foil and a cutter block as two independent parts you will need to change the parts in two steps: First remove the foil, either by pressing the release button if your shaver has one, or by pulling the foil. Next rotate the cutter block by 90 degrees and pull it off, holding it at the ends to avoid touching the blades. Please note this product is supplied in Retail Packaging Packaging Replacement Foil & Cutter for Braun models: This replacement part is suitable for the following series 5, 360 complete model numbers: 590cc, 570cc, 560, 550, 8995, 8990, 8985, 8975, 8970 Model compatible – 8995, 8890, 8985, 8975, 8970, 8595,8590,8585. 590cc, 570cc,560,550.

Get your shaver back to 100% performance with the Braun Series 51S replacement head and foil and cutter. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this replacement head you will get back to the superior close shave you have come to expect from Braun.

Small investment, peak performance
Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs. In accomplishing this substantial task, the cutting parts will gradually wear out and your shave may become less close and comfortable. That’s why Braun recommends changing your shaver’s foil and cutter block every 18 months to maintain your shaver’s maximum performance. For an efficient shave every day

How to replace your shaver head?
For older models which have a foil and a cutter block as two independent parts you will need to change the parts in two steps: First remove the foil, either by pressing the release button if your shaver has one, or by pulling the foil. Next rotate the cutter block by 90 degrees and pull it off, holding it at the ends to avoid touching the blades.

Please note this product is supplied in Retail Packaging Packaging

Replacement Foil & Cutter for Braun models: