Best Bho Vacuum Purge Kit For Sale

This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

Chamber Lid May Or May Not Have Logo Etched onto the top.

This Kit Includes:

(1) Stainless Steel Chamber

(1) Industrial grade silicone gasket

– Gasket can withstand 390F max temp.

– 60A durometer density

(1) Glycerin filled vacuum gauge (must be regulated upon arrival)

 - Max vacuum -29Hg (+/-.5Hg) at sea level

(1) Leak free nickel plated air manifold

 - Vacuum release valve and vacuum connect valve

(1) 1/4 Female flare universal pump adapter for vacuum hose

(1) 5ft clear steel reinforced vacuum hose

(1) 8″x8″ Platinum cured silicone non stick VacPad

(1) 50 Micron air filter

Internal Dimensions:

8” Tall X 10.25” Diameter

This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

Chamber Lid May Or May Not Have Logo Etched onto the top.

This Kit Includes:

(1) Stainless Steel Chamber

(1) Industrial grade silicone gasket

– Gasket can withstand 390F max temp.

– 60A durometer density

(1) Glycerin filled vacuum gauge (must be regulated upon arrival)

– Max vacuum -29Hg (+/-.5Hg) at sea level

(1) Leak free nickel plated air manifold

– Vacuum release valve and vacuum connect valve

(1) 1/4 Female flare universal pump adapter for vacuum hose

(1) 5ft clear steel reinforced vacuum hose

(1) 8″x8″ Platinum cured silicone non stick VacPad

(1) 50 Micron air filter

Internal Dimensions:

3” Tall X 10” Diameter

BestValueVac Chambers are not compatible with stabilization resin (i.e. Cactus Juice, Gator Venom, Minwax etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water.

This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Naperville, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

Specifications:

• Chamber Material: Pyrex Glass
• Gasket Material: Silicone
• Lid Material: Polycarbonate
• Internal Dimensions (ID): 3″ Tall x 6.75″ Diameter Drafting Downwards to 6″
• Vacuum Gauge (Glycerin Filled): InHG (0)-(-30)
• Manifold Connections: 1/4″ SAE and 1/4″ FNPT
• Temperature Rating: 150°F (65°C)

Compatibility Explanation:

SVac chambers are not compatible with stabilization resin (i.e. Cactus Juice, Gator Venom, Minwax etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents

Pump Information:

Customers using solvents such as stabilization resins (MinWax, Gator Venom etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice

These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.

If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.

This heavy duty vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components, it is required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins. Design with a built-in valve and gauge provides ease of use and convenience, perfect for degassing silicone, epoxy resin, solvents and any else.

Features:
• High strength stainless steel chamber
• Highly durable and reversible silicone gasket
• Glycerin filled vacuum gauge
• Perfect for applications like degassing urethane, silicone, epoxies, stabilize wood, extracting essential oils from organic materials

Specification:
• Material: Stainless Steel
• Product Size: D7.9″*H7.9″in / D200*H200mm
• Maximum Rated Vacuum: 29.9inHg @ sea level / 24.82 @ 5000ft
• Hose Connector: 1/4″ SAE w/ 45º Seat
• Chamber Max Temp: 160ºF
• Gauge Style: Glycerin Filled
• Silicone Pad Size: 3-3/4″ x 3-3/4″
• Chamber Dimension: 8.25″ x 8″ (Without Lid)
• Overall Dimension: 8″ x 13-3/4″

Package Content:
• 1 x 3/4’’ Acrylic Lid
• 1 x Heat Treated Silicone Lid Gasket
• 1 x Glycerin Filled Gauge with Brass Fittings
• 1 x 50 Micron Air Filter
• 1 x Non-stick Silicone Pad
• 1 X 5 Foot Steel Wire Collapse-Proof Hose

This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Naperville, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

Specifications:

• Chamber Material: Pyrex Glass
• Gasket Material: Silicone
• Lid Material: Polycarbonate
• Internal Dimensions (ID): 3″ Tall x 6.75″ Diameter Drafting Downwards to 6″
• Vacuum Gauge (Glycerin Filled): InHG (0)-(-30)
• Manifold Connections: 1/4″ SAE and 1/4″ FNPT
• Temperature Rating: 150°F (65°C)

Compatibility Explanation

SVac chambers are not compatible with stabilization resin (i.e. Cactus Juice, Gator Venom, Minwax etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents.

Pump Information:

Customers using solvents such as stabilization resins (MinWax, Gator Venom etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice)

These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.

If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.