Best Dresser Drawer Track Hardware 1 Inch

Why struggle with a drawer that won’t open or close properly when you can simply replace the slides? Whether you need to replace damaged or missing slides or are installing them new for the first time, Prime-Line R 7210 Drawer Slide Kit fits most bottom/side-mounted drawer systems and is for use in 16” deep drawer cabinets. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without.

The drawer slide kit is constructed of steel tracks with a white powder coated finish, self-lubricating plastic rollers and a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing. With a maximum load capacity of 75 lbs., the drawer slide set is sturdy and can hold up to years of repeated use. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks. Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website.

Installation Tip: The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top

Note: This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16” diameter wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces.

5 pair,20 inch,Mounting screws included screws included.
Made from high-grade cold rolled steel that is electrom zinc plated.
Steel ball-bearing action that offer less noise at closing and opening
Lever disconnect for easy drawer removal
Side mounted, non handed design, positive stop

Our rounded pull knob is an excellent cabinet accessory for any room. Each item contains 10 total units as well as individually bagged 1″ mounting screws. It is the ideal hardware for redesigning your home, kitchen and bath. Giving you great hardware at a price that you can afford.

Rok specializes in providing only the highest quality cabinet hardware. These knobs provide a classy look to any door and drawer. If you are looking for quality that can be both seen and felt, look no further. Rok Hardware – Build It Better, For Less.

BirdRock Home Classic Handle Pull is the perfect cabinet hardware providing a warm and handsome touch to any drawer, cabinet, cupboard or furniture with its oil rubbed bronze design. The classic handle has a solid, durable construction providing long-lasting hardware with an elegant, classy look. Each pack includes installation screws making it easier to install upon arrival. Refresh and update your home with BirdRock Home Classic Handle Pull.

This 1 in. Diameter roller mounts to the front of your drawer opening. It helps to center your drawer and allows for a smooth operation. Comes complete with fasteners for a quick and easy installation.

New 1 1/2 inch ceramic cabinet, drawer, or furniture knob. Mounting hardware included. Can be wiped clean with a soft damp cloth. Great addition and nice finishing touch to any room!

Product Description

These rear drawer track brackets are constructed of a thick, durable plastic and they come in white, left and right-hand pair. They are designed to support and maintain alignment of bottom/side-mounted steel drawer slides They feature an easy to install design, with a 3-9/16 in. socket depth to allow for front to back adjustment of the drawer slides. This pair of drawer track back plates includes the installation fasteners, and they have a maximum load rating of 75 lbs. per pair. These rear drawer replacement track sockets are simple to install and are used by many.

From the Manufacturer

This rear drawer track socket is constructed from white nylon. It features a socket depth that allows for front to back adjustment of the rail. This type of track socket is used on side mounted drawer track systems.

Features:Full Extension non-handedPositive Stop for fully extended drawersHold-in design to prevent bounce back32mm hole pattern with breating tabsOpen access design for easy cabinet mountingCushioned feature for pick-up noise reductionSteel ball bearing movement100 lb. BIFMA tested load ratingFace frame mounting holeLever disconnect Application: Medium duty box drawer applications. This product has various applications in kitchens, office, store fixture, institutional and residential casework. Mounting: Side Mount Movement: Full extension with telescopic movement Side Clearance: 1/2” (12.7mm) + 1/16” Height: 1.80” (45.7mm) Load Rated: 100lbs (45kg) BIFMA load rated

Plastic Rear Mounting Bracket for use with Knape & Vogt 1284 Series Drawer Slide.

Plastic constructed guides are useful in keeping your drawers aligned. Designed to fit a 9/32 in. x 3/4 in. track. Easily mounts to the back of your drawer. Contains enough parts for two drawers.

Note: Although technically ‘full extension’ slides by design, 12″ and 14″ slides with integrated soft close devices will not provide double the original length when fully extended. This is due to the limitations on member length imposed by the small package and integration of the soft closing mechanism. Actual extended length: 20-5/16″. Height: 1-13/16″ (45.7mm). Zinc Finish. Requires a 1/2″ side spacing per side (Overall 1″). Pull force of 5.5 to 6.5 lbs. Smooth and reliable, this soft close drawer glide is perfect for your job. Rok Hardware provides products with quality that can be both seen and felt!