techreviews1 
Nowadays, there are so many products of kenmore electric water heater parts in the market and you are wondering to choose a best one.You have searched for kenmore electric water heater parts in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings kenmore electric water heater parts which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Kenmore 9000225015 Water Heater Heating Element, 3,800-watt Genuine Original Equipment Manufacturer (OEM) Part, 2-Pack
Camco 07843 Single Element Water Heater Thermostat with HLC
Amazon.com
- For single heating element applications
- Energy efficient range setting
- Built-in safety switch to help prevent the water heater from overheating
- Detailed instructions and wiring diagrams for easy installation
- Adjustable temperature range from 110F - 160F (factory preset to 120F)
Ultra Durable WR49X10173 Dispenser Water Tube Heater Kit Replacement by Blue Stars – Exact Fit for General Electric Hotpoint Kenmore fridge – Replaces PS1766223, 1381601, AP4318572
Amazon.com
- ✅
- MODEL NUMBER: WR49X10173 Dispenser Water Tube Heater Kit
- ✅
- EASY TO INSTALL - It is made exactly fit for most top name brand( General Electric Hotpoint Kenmore ) and replaces part numbers: PS1766223, 1381601, AP4318572
- ✅
- SAVE TIME SAVE MONEY - Inexpensive way to fix or repair a refrigerator
Camco 02482/02483 1650W 120V Screw-In Water Heater Element – High Watt Density
Product Description
1650W, 120V, Water Heater Screw-In Element, Use For 6 Gallon Water Heaters.
From the Manufacturer
Camco’s 1650W 120V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Reliance Water Heater 9007876 Gas Thermopile Assembly, Pack of 1
Reliance, Natural Gas Thermopile Assembly, Includes Pilot Tube, Ferrule Nut Igniter Wire, Millivolt Generator & Bracket, Fits 301 Series Natural Gas Standard Tank Water Heaters. Reliance, natural gas thermopile assembly, includes pilot tube, ferrule nut igniter wire, millivolt generator & bracket, fits 301 series natural gas standard tank water heaters. INCLUDES ALUMINUM PILOT TUBE INCLUDES BRASS FERRULE AND NUT INCLUDES IGNITER WIRE INCLUDES MILLIVOLT GENERATOR INCLUDES BRACKET
44 Inch Flexible Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Water Heater Anode Rod for GE, Rheem, Reliance, Richmond, Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon
Amazon.com
- GET RID OF ROTTEN EGG SMELL - Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE - Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
Podoy WR49X10173 Dispenser Water Tube Heater Kit Compatible with GE General Electric Hotpoint Kenmore fridge Replaces PS1766223, 1381601, AP4318572
Amazon.com
- ✅ MODEL NUMBER: WR49X10173 Appliance Dispenser Water Tube Heater
- ✅ REPLACES PART NUMBERS: AP4318572 PS1766223, WR49X10173, 1381601, AP4318572
- ✅ EASY TO INSTALL: It is made exactly fit for most top name brand - General Electric Hotpoint Kenmore
- ✅ PREMIUM QUALITY - The replacement part is made from durable high quality material and well-tested by the manufacturer
- ✅ NOTES: This is the non-original aftermarket parts
Product details:
Dispenser Water Tube Heater for General Electric AP4318572 PS1766223, WR49X10173
Replaces WR49X10173, 1381601, AH1766223, EA1766223, PS1766223, LP24787
Dispenser Water Tube Heater for General Electric AP4318572 PS1766223, WR49X10173
Replaces part numbers: AP4318572, 1381601, AH1766223, EA1766223, PS1766223
WR49X10173 Appliance Dispenser Water Tube Heater
This is the non-original aftermarket parts
Apcom WH10-A Bradford White Upper Water Heater Thermostat
Replacement upper thermostat with high limit for Bradford White water heaters.
About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Amazon.com
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾" NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
Camco 02142/02143 1500W 120V Screw-In Water Heater Element – High Watt Density
Product Description
Camco RV 1500 Watt Universal Element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included. 1500w – 120v.
From the Manufacturer
Camco’s 1500W 120V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02202/02203 2000W 120V Screw-In Water Heater Element – High Watt Density
AO Smith Product 9001954015
Reliance 9000509-045 Single Element Electric Thermostat
Product description
9000509-045 Features: -Used with single element electric water heaters. -Finish: Black and brass. -Made in the USA. Application: -Electric water heater. Product Type: -Thermostat. Finish: -Black and brass. Country of Manufacture: -United States.
From the Manufacturer
Single element electric water heater thermostat
AO Smith 9003573005 (Product Number)
Camco 02262/02263 3000W 240V Screw-In Water Heater Element – High Watt Density
Product Description
Camco 02263 3000 Watt 240 Volt Screw-In ElementCamco 02263 3000 Watt 240 Volt Screw-In Element, Features; Each screw-in element comes with one gasket; 3000 watt, 240 volt, 10″ minimum tank diameter, 150+ watts per square inch; Carded
From the Manufacturer
Camco’s 3000W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Blue Lightning 79099 Residental Magnesium Flexible Anode Rod, Nipple Fitting, 44-Inch
Blue Lightning magnesium flexible anode rod, nipple fitting, 44-inch ( four sections) our new innovative 79099 of anode rod fits into any tight spot you may find yourself faced with. This anode rod is also made from magnesium rather than aluminum to ensure that you avoid any potential unhealthy side effects from aluminum by-products. Magnesium can actually improve your health by aiding in blood and heart disorders. It is also useful in lowering anxiety, relieving menstrual cramps, counter acting adhd, strengthening bones, and a long list of other advantages. Unless you want to replace your entire water heater you are going to have to replace your anode rod at one point or another. Blue Lightning anode rods provide you with the best solution to your needs by providing a reliable product that ensures optimal water quality.
WR49X10173 Dispenser Water Tube Heater Kit by AMI PARTS Compatible with GE General Electric Hotpoint Kenmore fridge-Replaces PS1766223, 1381601, AP4318572
Amazon.com
- [Parts Number]：WR49X10173 Dispenser Water Tube Heater Kit
- [Compatible Brands]: General Electric Hotpoint Kenmore fridge
- [Replaces Part]: PS1766223, 1381601, AP4318572
- [Fixes Symptoms]: Not dispensing water
- [Quality Warranty]:The replacement part is made from durable high quality material and well-tested by manufacturer.For any reason you’re not satisfied,you can ask for a replacement or full refund.
WR49X10173 Dispenser Water Tube Heater Kit.Refrigerator Water Dispenser Tube Heater Kit. Helps prevent frozen water lines. Works with GE refrigerator model numbers starting with BSS, DSS, ESH, GSH, GSS, GST, HSS, and SSS.
Replaces Fit Models: PS1766223, 1381601, AP4318572
This part works with the following products: Refrigerator
This part works with the following brands: General Electric Hotpoint Kenmore fridge
