Best Braun 5414 Replacement Cutter

Did you know? You shave the equivalent of a football pitch every 18 months. Shaver foils and cutterblock are precision parts that, in time, are subject to wear. This wear is dependent on your shaving method and beard type. To maintain optimal shaving performance you should clean the shaving parts regularly with Braun cleaning agents and consider replacing the foil and cutterblock every 18 months. This foil and cutter is suitable for the following shavers: 5000,5315, 5414,5415,5416,5417,5418,5427,5441,5443,5444,5446,5455,5476,5478,5483,5484,5497, 5504,5505,5515,5520, 5610,5611,5612,5613,5663, 5704,5705,5720,5721,5723,5724,5735,5736,5738,5739,5770,5771,5773,5774,5775,5776,5790, 5873,5874,5875,5876,5877,5884,5887,5888,5895,5897

Foil & Cutter Head Replacement Pack for BRAUN 5000/6000 Series Shavers, Fits both 5000 Series Shaver and 6000 Series Shaver, Made in Germany, For optimum performance; clean regularly. Brings back 100% performance, Blades should be replaced every eighteen months

Braun shavers are very reliable. Nevertheless, the cutting parts ? the foil and cutting block ? wear down over time with repeated use. This is hardly surprising, as in 18 months you have already shaved an area the size of a football pitch! As a result, Braun recommends you replace the foil and cutting block every 18 months to ensure your shaver continues to perform at its best.This replacement part is suitable for Flex Integral 5550, 5525, 5520, 5316.

Product Description

Model No. 6000. Fits Model No.: 6550, 6525, 6520, 6515, 6510, 5515, 5510, 5416, 5415, 5414, 5315, 5314, 5312, 5311, 5005. Replace your foil and cutter block every 18 months to get a 25% better shave. (Overall evaluation from Braun users comparing their shave with new parts and those used for 18 months). To maintain optimum shaving performance, Braun also recommends cleaning both regularly with Braun cleaning agents.

Amazon.com

Braun recommends that the heads on its Flex Integral electric razors (model numbers in the 5000 and 6000 series) be replaced every 18 months. This pack consists of the dual-foil and cutterblock for those Flex Integral razors. Though it will fit all Flex Integral razors, the dual-foil in this pack is housed in black and is best for models with black housing around their foils. (Replacement packs in other colors are also available.) Each of the two foils and the cutterblock perform individually as the razor runs across the face for a close, smooth shave. Installation is easy, and the diagrams on the package show how to set the razor up. –Fred Brack

Compatible razor:

Part-No.: 81387950
Model: 390cc-4, 390cc-5 Type: 5411
Model: 340s-4, 345s-4, 340s-5, 345s-5 Type: 5414
Model: 380s-4 Type: 5416
Model: 370cc-4, 350cc-4, 350cc-5 Type: 5412
Model: 320s-4, 330s-4, 320s-5, 330s-5 Type: 5415
Model: 390cc, 395cc-3 Type: 5772
Model: 370, 350cc, 370cc Type: 5774
Model: 330, 320 Type: 5776
Model: 380 Type: 5773
Model: 340 Type: 5775

Did you know? You shave the equivalent of a football pitch every 18 monthsShaver foils and cutterblock are precision parts that, in time, are subject to wear. This wear is dependent on your shaving method and beard type.To maintain optimal shaving performance you should clean the shaving parts regularly with Braun cleaning agents and consider replacing the foil and cutterblock every 18 months.Suitable for models: 5790, 5775, 5770, 5614, 5612, 5610, 5874, 5877

Get your shaver back to 100% performance with the Braun Series 31B replacement head. Braun recommends changing your shaver’s blades every 18 months to maximize shaving performance and comfort. With this replacement head you will get back to the superior close shave you have come to expect from Braun.

Small investment, peak performance
Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs. In accomplishing this substantial task, the cutting parts will gradually wear out and your shave may become less close and comfortable. That’s why Braun recommends changing your shaver’s foil and cutter block every 18 months to maintain your shaver’s maximum performance. For an efficient shave every day

How to replace your shaver head?
For older models which have a foil and a cutter block as two independent parts you will need to change the parts in two steps: First remove the foil, either by pressing the release button if your shaver has one, or by pulling the foil. Next rotate the cutter block by 90 degrees and pull it off, holding it at the ends to avoid touching the blades.

Please note this product is supplied in Retail Packaging Packaging

Replacement Foil & Cutter for Braun models:

Braun 6000FC/31B Replacement Pack For Shaver Models 5775

• For models CT2s, CT2cc, CT3cc, CT4s, CT4cc, CT5cc, CT6cc, Cool Tec, 3105, 3305, 3310, 3610, 3612, 3614, 3615, 3710, 3770, 3773, 3775, 5447, 5449, 5629, 5634, 5635, 5683, 5685, 110, 130, 140, 150, 100, 105, 155, 205, 209, 255, 259, 1007, 1008, 1012, 1013, 1501, 1507, 1508, 1509, 1512, 2035, 2040, 2060, 2540, 2540S, 2560, 5459, 5461, 5462, 5463, 5464, 5596, 5597, 320, 330, 340, 350, 350cc, 360, 370, 370cc, 380, 390CC, 5415, 5772, 5774, 5775, 5779, 170, 190, 1715, 1775, 2775, 2675, 2776, 2778, 2865, 2876, Cruzer 2, Cruzer 3, Cruzer 4, 5729, 5730, 5732, 5733, 5734, 360, 370, 380, 390, 390CC, 5000, 5005, 5010, 5015, 5311, 5312, 5314, 5315, 5316, 5317, 5410, 5414, 5415, 5416, 5417, 5427, 5441, 5442, 5443, 5444, 5446, 5466, 5478, 5503, 5504, 5505, 5510, 5515, 5520, 5525, 5550, 5600, 5610, 5611, 5612, 5613, 5614, 5625, 5720, 5721, 5722, 5723, 5724, 5735, 5736, 5737, 5738, 5770, 5774, 5775, 5776, 5790, 5873, 5874, 5875, 5876, 5877, 5878, 5884, 5885, 5886, 5887, 5888, 5895, 5897, 6012, 6015, 6312, 6510, 6512, 6515, 6518, 6520, 6521, 6522, 6525, 6550, 5465, 5466, 5468, 5476, 5477, 5478, 5485, 5503, 5504, 5505, 5506, 5507, 5703, 5704, 5705, 5706, 5719, 5720, 5721, 5722, 5723, 5724, 5735, 5737, 5738, 5739, Contour, 720, 730, 760, 790, 760CC, 790CC, 5671, 5673, 5675, 9565, 9566, 9585, 9781, 9782, 9785, 9795, 9595, 9595CC, 5671, 5673, 567, 5693, 195s, 197s, 199s, 330, 340, 5301, 5491, 5492, 5493, 5494, 7475, 7493, 7497, 7504, 7505, 7510, 7511, 7514, 7515, 7516, 7520, 7526, 7540, 7546, 7564, 7570, 7630, 7640, 7650, 7664, 7680, 7690, 7763, 7765, 7783, 7785, 7790, 4875, 4845, 4840, 4815, 4776, 4775, 4770, 4740, 4745, 4747, 4737, 4735, 4715, Types: 5714, 5715, 5717, 5742, 5743, 5746, 5747, 8385, 8374, 8377, 8781, 8595, 8795, 8581, 8583, 8585, 8588, 8590, 8781, 8783, 8785, 5643, 5645, 550, 560, 570, 590, 590CC, 8970, 8975, 8985, 8986, 8987, 8990, 8991, 8995, 510, 550, 560, 565, 570, 570cc, 590, 590cc, 8374, 8377, 5643, 5645, 5646, 5647, 5649, 5751, 5757, 4000, 4005

This cord is now being produced by Braun as a straight cord and not a curly cord.

• For Series 9 models 9030s, 9040s, 9093s, 9050cc, 9070cc, 9075cc, 9080cc, 9090cc, 9095cc, 9240s, 9242s, 9250cc, 9260s, 9293s, 9299s, 9280cc, 9290cc, 9291cc, 9292cc, 9293s, 9295cc, 9296cc, 9297cc, 9299cc
• Fits Models:  5020s, 5030s, 5040s, 5050cc, 5070cc, 5090cc, MG5090, 190, 195, 197, 199, 1715, 1775, 2775, 2776, 2838, 2864, 2865, 2866, 2874, 2876, 4740, 4745, 4775, 4776, 5610, 5611, 5612, 5613, 5614, 5663, 5691, 5736, 5790, 5791, 5795, 5796, 5770, 5771, 5790, 5774, 5775, 5776, 5873, 5874, 5875, 5876, 5877, 5884, 5885, 5886, 5887, 5888, 5895, 5897, 6610, 6620, 6680, 6690, 395CC, 390CC, 390CC-4, 380S-4, 380, 370CC-4, 370CC, 370, 360, 350S-4, 350CC, 340, 345S-4, 330S-4, 330, 320S-4, 320, 310s, 300s, 3050CC, 3070CC, 3010s, 3040s, 3045s, 3080s
• Fits Types: 5496, 5325, 5408, 5409, 5411, 5412, 5414, 5415, 5416, 5708, 5710, 5713, 5714, 5720, 5721, 5722, 5723, 5724, 5729, 5730, 5733, 5735, 5737, 5738, 5739, 5742, 5743, 5748, 5759, 5772, 5773, 5774, 5775, 5776, 5779, 5783
• Fits Z30, Z40, Z50, Z60, Cruzer2, Cruzer3, Cruzer4, Cruzer5 Face, Cruzer6 Face
• For CoolTec models CT2, CT3, CT4, CT5, CT6, 5676
• Also can be used with Pulsonic Series 7 Models/Types: 5671, 5673, 5674, 5675, 5693, 720, 720s, 730, 760, 760cc, 790, 790cc, 9565, 9566, 9585, 9781, 9782, 9785, 9595, 9795 but does not have crook end

  Product color may vary