Best 3 X 4 Foot Office Chair Mat

Bertech ESD Chair Mat Kits are made of rigid solid vinyl with a buried conductive layer, giving it consistent electrical properties. They provide superior physical properties along with the rigidity needed for today’s office environment. ESD chair mats are resistant to degradation by inorganic acids, organic acids, reducing agents, detergent solutions, alcohols, and mineral oils. Suggested temperature range of -20 to 160 Degrees F. Available in gray color only with an embossed pebble pattern. Applications: Electronic Assembly and Manufacturing, Pharmaceutical Plants, Cleanroom Operation, Fiber Optics, Aerospace, and Hospitals. They are designed for use under chairs in an office environment or a manufacturing facility. Gauge/thickness: 0.190” +/-0.010″ ; 3/16”. tensile: 1500 lbs./sq. in. minimum. Elongation: 150 percent minimum. Durometer: 90 +/-10, Shore A. Mat comes with a heel grounder and grounding cord. RoHS Compliant. Made in USA.

This easy to install, durable, plastic floor runner will extend the life of your flooring by protecting it against dings, scratches and spills in the garage, office, basement, workshop or factory.

The wide ribs allow heavy objects to slide. It is also multi-functional and can be used as a shelf liner on wire rack shelving, in cabinets and tool box drawers, inside pet cages or as a countertop dish drainer.

Easily cut this plastic mat with scissors or a utility knife to fit your needs. It will lay flat without adhesive but can be secured into place with any vinyl compatible product or two-sided tape.

This product is for indoor use only and can be slippery when wet. It should not be used over carpet.

Rubber Cal’s “Ramp-Cleat’s” are 36″ wide rubber ramp mats that offer great traction with their corrugations and protrusions running widthwise. This rubber floor mat is available in an assortment of lengths to meet the needs of a variety of applications. The no-slip mats are designed with a surface pattern to help consumers maintain traction regardless of any debris or wetness that may be present. Having textured rubber flooring keeps foot traffic safe while maximizing comfort. Since the corrugations run widthwise on this anti-slip matting, it is well suited for applications that have an incline, such as ramps, boat docks, and temporary walkways. Installation and removal can be done without difficulty by using a double-sided carpet tape, making these long rubber door mats moveable when needed. The fabric-based finish also adds subsurface traction that keeps the rubber floor mat’s bottom surface secure while in use. This non-slip rubber flooring is made from SBR to help create a completely watertight surface, with moderate chemical resistance. It can be easily cleaned with most common household cleaners, but highly caustic solutions such as bleach are not recommended. The widthwise corrugations are what make this traction rubber work so well in transient locations where there may be heavy foot traffic. Make your floors safe and prevent slips and falls with the added traction, with these no-slip mats.

Made from 100% post consumer recycled drinking bottles We offer a wide variety of sizes and colors to choose from. Recommended for hard surface floors and low pile carpet. Its perfect for use in entranceways, home front and back doors, production areas, breakrooms, kitchens, vending areas, water fountains, even around ice machines Indoor matting collects moisture and debris from shoes as they enter your home or building. Dual-Mat System The best way to keep dirt and moisture from being tracked into your home or building is to use our dual-mat system at every entranceway: an Outdoor Mat to scrape shoes clean and an Indoor Mat to wipe shoes dry. Guardian Ecoguard series mats are the indoor part of this system, and when paired with an outdoor mat such as a Guardian Clean Step Scraper, or Brush Tip mat they provide ultimate protection for your home or building. These mats feature a carpeted surface is made from 100% post consumer recycled drinking bottles. Plus a wear resistant durable crumb rubber backing and fashionable fabric border. The bi-level construction traps dirt below surface and the beveled edge helps to reduce trips and falls. They are also easy to clean, just sweep, shake out or vacuum. Warranty Guardian Ecoguard Mats have a One-year warranty for material and workmanship, with proper use and maintenance. Guardian Floor Protection warrants new products against defects in material and workmanship when used and maintained as instructed. See our website for full details.All trade sizes indicated are approximate sizes, mat sizes are not always an exact measurement. Due to the manufacturing process some shrinkage may occur.

Best #136 Polynib entrance mat. Polynib has the rich, luxurious look of Berber-style carpeting for an always elegant appearance. A very tightly nibbed loop of needle-punched yarn entraps and hides debris while retaining moisture at the same time. 24 ounces of carpet per square yard provides greater crush resistance for long lasting wear. Polynib comes with a heavy-weight vinyl backing in corresponding colors to help reduce mat movement and enhance the aesthetic appeal of the mat. Test – Test Description – Results: (1) Abrasion Resistance ASTM D3884-01 – Test specimen is subjected to the rubbing action of two abrading wheels under controlled conditions. Results measured in weight loss (Grams) – 1. 51. (2) Accelerated Wear – Test specimen is subjected to the action of rollers under a specified load. Sample is rotated 10 degree after each pass. Results measured in thickness loss (percent) – 25. 42 percent (3) Accelerated Soiling ASTM D6540-00 – Test specimen is subjected to an accelerated soiling process. for a predetermined length of time. The sample is vacuumed, rated, submitted to an extraction device, then rated again – (Based on visual inspection) 3 – Vacuum Rating 3. 5 – Rating After Extraction. (4) Water Retention – Test specimen is submerged in water for 5 minutes, removed, drained for 15 seconds and weighed. Results measured in weight gain. (Gallons per square yard) – 0. 45. (5) Flammability ASTM D2859 (CPSC FF 1-70) – Intended to measure the mattings response to an ignition source in a controlled environment. The uncharred area of the test specimen must be greater than 1 inch to pass – 3. 6 Inches. All testing of NoTrax floor matting has been performed by an independent testing laboratory. Available in charcoal color. Use for indoor – entranceways, lobbies, all medium traffic areas.